Binotto introduces its new 24 V DC hydraulic unit, designed to be installed inside a vehicle as a power supply sub-assembly for a telescopic cylinder.

KEY TECHNICAL FEATURES:

• Dimensions: 74 cm long – 35 cm wide – 35 cm high
• Weight: 62.5 kg
• Power supply: 24 V DC for the electric motor and control components
• Directional valve: 120 L 24 V
• Configuration: 6 cm³/rev gear pump and 4.5 kW electric motor
• Maximum operating pressure: 180 bar, with a relief valve to protect against pressure peaks
• Maximum declared noise level: 80 dB(A)

Compact and integrated, the power pack is designed to ensure smooth, controlled operation of telescopic cylinders.

Why choose the Binotto 24 V DC hydraulic power pack?

A tipper truck needs hydraulic power to operate its telescopic cylinder. The Binotto power pack provides it through a single power supply sub-assembly that combines the gear pump, the electric motor and the valve block, and is installed directly on board the vehicle. What makes it special is that the tractor unit does not need to be tipper-ready, i.e. fitted with a hydraulic circuit: it can also be, for example, a tractor unit used for non-tipping trailers.

How does the 24 V DC hydraulic power pack work?

The power pack comes with a wireless remote control that operates the pump and starts the hydraulic system. Operation is controlled by a set of solenoid valves that regulate the oil flow in the hydraulic circuit depending on whether the cylinder is extending or retracting.

Two-stage lifting (UP button)
The remote control first starts the pump idling, circulating the oil, and then diverts the oil to the actuating cylinder to raise the body.

Two-stage lowering (DOWN button)
Lowering is also two-stage and offers two speeds, slow and fast, as required.

Slow lowering is important when the load has not been tipped out, because the body then needs to come down in a controlled way.

AVAILABILITY

• Binotto code: PPKHD00N6024HXBI61
• Description: PPK_HD 24 V [4500 W] 1P 6,0 [BI][I] + RCR K202
• Availability area: Europe

Operating conditions

According to the technical data sheet supplied with the product, the mineral hydraulic oil should have an optimal viscosity of 46 mm²/s, a recommended filtration of 25 µm and an optimal oil temperature between 40 and 55 °C, with an ambient temperature between -15 and +35 °C.

Do you have a project that requires a hydraulic system? Contact the Binotto team or take a look at our range of products for tipper trucks.